To install the flowscape att on a yealink panel use the following instructions.
- Start the panel and select language and time zone
- swipe down from the top and select the cogwheel to enter settings
- select "about" to see the panels IP adress. Example "IPv4 192.168.1.197"
- enter the IP adress in a web browser. Example "https://192.168.1.197"
- you will get a warning that the connection is not private, show advanced options select "proceed to https://xxxxxxxx"
- enter the login "admin / 0000"
- select "system"
- select "update"
- Under "Manual Update" you will find " device firmware" next to it is "select file", press it and select the yealink .rom
- the panel will then need to be left alone for 6-8 minutes to complete the firmware update.
- do step 1 again and select "Flowscape" after that.
Comments
0 comments
Please sign in to leave a comment.