Step 1: Perform Factory Reset / Replace Operating System
For IADEA 1078 (Android Version 7)
Updating the Operating System (Firmware)
-
Download the New Operating System:
- Download firmware from this page (addon-Neutral-Android7(1.0.2).pkg) or from here.
-
Prepare the USB Drive:
- Format a USB drive as FAT32 (maximum 32 GB).
- Transfer the firmware file to the root directory of the USB drive. Ensure there is only one .pkg file on the drive.
-
Install the Firmware:
- Insert the USB drive into the panel.
- Exit the Meetio app and go to the Android home screen.
- Navigate to File Manager and grant the USB new Privilages (click yes on the pop-ups).
- Navigate to Settings > System > Firmware Update > Manual.
Note: A video of this procedure is attached to this page.
Note: After installation, the panel will reset, and the Meetio app will be removed. You may need to reinstall other apps and reconfigure settings like network configurations.
For Other IADEA Panels
Factory Reset
A factory reset restores the player to its original state, clearing errors, formatting storage, and resetting passwords.
-
Performing a Factory Reset:
- Disconnect all power from the device.
- Press and hold the Reset button on the back of the device.
- While holding the Reset button, power on the device.
- When the Status light blinks orange, release the Reset button.
The player will restore to its original factory state and reboot.
-
Alternative Method:
- A factory reset can also be performed via the configuration menu. Refer to the user manual for detailed instructions.
Step 2: Installing the Flowscape App on IADEA Panels
-
Prepare the Files:
- Download one of the APK files for the Flowscape app from this page.
- 3.5
- 3.6
- 4.0
- Copy the APK file to a USB drive..
- Download one of the APK files for the Flowscape app from this page.
-
Connect the USB Drive to the Panel:
- Start up the IADEA panel.
- In the Basic Settings menu, click Advanced.
- Use a mouse to click the lower-right corner three times to access the advanced configuration screen.
-
Install the App:
- Open the File Manager app from the Android desktop.
- Navigate to the external device folder by switching from ‘Internal’ to ‘SD Card.’
- Locate the .apk file and click Install.
-
Complete the Setup:
- Once the installation is complete, launch the Flowscape app from the main menu to finalize the setup.
Comments
0 comments
Article is closed for comments.