Yealink
Upgrading the firmware results in upgrading the Flowscape-app to 4.1.0. Don't do this if you want to keep 3.5.0 !
- Press digital settings-button on screen (right side), optionally swipe up from Yealink-screenside.
- Scroll down and click menu "Upgrade" (password: 0000 or 1111 or 1234).
- Select APP or Firmware upgrade:
Firmware is the low-level system software embedded in the device. It controls hardware, manages network, system settings, security, etc. Yealink periodically releases firmware updates to fix bugs, patch vulnerabilities, add basic features, and support new hardware.
App (or Panels App / Teams App etc.) is the application layer that runs on top of the firmware. For example, in a Teams setup the “Panels App” is what manages the user interface for booking rooms, showing calendar info, LED states, etc. This app is often updated more frequently than firmware.
Qbic
- Download the latest firmware using Qbic's support page.
- Copy the firmware onto a USB drive (FAT or FAT32) (remote updating or OTA is not available).
- Insert the USB drive into one of the panel’s USB ports.
- Navigate to Settings → Firmware update → Firmware update (the USB option).
- The panel should detect the image and offer an “Upgrade” button. Proceed to install.
- Once the installation completes, reboot the device.
- Confirm the OS version via Settings → About device
Philips
- Visit Philips’ official support or download center and obtain the correct update.zip file for the 10BDL5051T/00 model. Link.
- Format the USB drive as FAT32 and place the update.zip file in the root directory (do not unzip it).
- Enter Admin mode on the device: Press the rounded button + Volume Down.
- Go to Settings → Signage Display or About, then select System Updates → Local update
- Choose the update.zip file from the USB list and press OK. The device will reboot to initiate the firmware installation and then restart again once complete. Link.
- After the update, use Settings → Signage Display → System Tools → Factory Reset to restore clean settings
- Reconnect power
After the factory reset, disconnect and reconnect AC power (AC repower) to complete the process.
T230
Please ensure these panels are sent to Flowscape for the Android version patch.
If you need any assistance, feel free to contact Flowscape support at support@flowscape.se.
Comments
0 comments
Article is closed for comments.